LAWR

21 Annual Guide 2015 | SOURCE TESTING ASSOCIATION Description Compound/Method Standard Number MID* Intralaboratory alidation procedure for an alternative method compared to a reference method Alternate reference method procedure DD CEN/TS 14793:2005 Method for the determination of asbestos plant emissions by fibre count measurement Asbestos BS 6069-4.2:1991 Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide – Radiocarbon sampling and determination Biomass BS ISO 13833:2013 Quality assurance of an AMS Calibration of CEMS BS EN 14181:2014 MID 14181 Determination of the mass concentration of carbon monoxide (CO). Reference method: non-dispersive infrared spectrometry Carbon Monoxide (CO) BS EN 15058:2006 Air quality – Test method for filtration characterization of cleanable filter media Cleanable filter media BS ISO 11057:2011 Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems CEMS sampling BS ISO 10396:2007 Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling of PCDDs/PCDFs Dioxin 1 sampling BS EN 1948-1:2006 MID 1948 Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Extraction and clean-up of PCDDs/PCDFs Dioxin 2 extraction BS EN 1948-2:2006 MID 1948 Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Identification and quantification of PCDDs/PCDFs Dioxin 3 quantification BS EN 1948-3:2006 MID 1948 Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs Dioxin 4 PCB sampling and analysis DD CEN/TS 1948-4:2007 Determination of the volume flowrate of gas streams in ducts. Automated method Flow automatic BS ISO 14164:1999 Manual and automatic determination of velocity and volumetric flow in ducts – Part 1: Manual reference method Flow (manual method) BS EN ISO16911-1:2013 Determination of velocity and volumetric flow in ducts – Part 2: Automated measuring systems Flow (automated method) BS EN ISO16911-2:2013 Manual method of determination of HCI. Hydrogen Chloride BS EN 1911:2010 Sampling and determination of gaseous fluoride content Hydrogen Fluoride BS ISO 15713:2006 MID 15713 Air quality. Certification of automated measuring systems – Part 1. General principles Instrument certification BS EN 15267-1:2009 Air quality. Certification of automated measuring systems – Part 2: Initial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process Instrument certification BS EN 15267-2:2009 The following is the list of current standards for emission monitoring Air quality – Certification of automated measuring systems – Part 3: Performance specifications and test procedures for automated measuring systems for monitoring emissions from stationary sources Instrument certification BS EN 15267-3:2007 Air Quality – Certification of automated dust arrestment plant monitors for use on stationary sources – Performance criteria and test procedures Instrument certification – Dust monitors BS EN 15859:2010 Elaboration of ISO17025 for stack emission monitoring ISO 17025 elaboration DD CEN/TS 15675- 2007 Manual method of determination of the concentration of total mercury Mercury BS EN 13211:2001 Determination of total mercury: automated measuring systems Mercury calibration BS EN 14884:2005 Determination of the otal emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V Metals BS EN 14385:2004 MID 14385 Manual method for the determination of the methane concentration using gas chromatography Methane – gas Chromatography BS EN ISO 25139:2011 Automatic method for the determination of the methane concentration using FID Methane – FID BS EN ISO 25140:2010 »

• Cover