WET News

WET News February 2014

Water and Effluent Treatment Magazine

Issue link: https://fhpublishing.uberflip.com/i/256132

Contents of this Issue

Navigation

Page 18 of 27

February 2014 | WET News | 19 PiPes & drainage | Chambers made to fulfil potential Contact the sales team on Tel: 0161 231 9140 info@hambakerpipelines.co.uk | www.hambakerpipelines.co.uk Ham Baker Pipelines, the pipe and fittings supplier you can always depend on in times of need. We promise to give you: • Rapid enquiry response and excellent technical advice • Significant stock of a wide range of high quality products • A 'one-stop-shop' for all of your needs, even specials, fabricated in the UK • On-site delivery, on time and on budget Put your trust in a long-term pipeline and fittings partner that won't let you down. Give us a ring today. With Ham Baker Pipelines you've got it made – and delivered! DUCTILE IRON PIPE FABRICATED PIPE COUPLINGS & ADAPTORS FITTOSIZE DUCTILE IRON FITTINGS VALVES HAWLE REPAIR CLAMPS One pipeline partner you can always rely * on {*v. To have faith or confidence in somebody or something.} 150kN and 100kN wheel loads from adjacent lanes simplified as a single load. The publication of the new Standard will ensure users benefit from time savings of 20-50% from using the circular precast manhole system. This has the potential to reduce installed costs by well over 15-30%, particularly when the manholes are installed without a concrete surround. The precast solution also uses less concrete and there is less waste and excavated material to be disposed of as landfill. The CPSA estimate 15,000 tonnes of CO2 equivalent of embodied carbon would be saved annually if all manholes manufactured by the Association's members changed to the new circular precast base system. The CPSA's precast circular manholes are further enhanced by responsible sourcing of raw materials from local suppliers to ensure cradle-to- site miles are low and the use of recycled materials helps keep embodied impacts to a minimum. In addition, because the complete system is manufactured under factory conditions by quality assured companies, the quality and finish is better than could be achieved on site. n For further information on changes introduced in the Standard, the CPSA has published a technical bulletin. www.concretepipes.co.uk/page/ quality-and-standards A perfect base plan

Articles in this issue

Links on this page

Archives of this issue

view archives of WET News - WET News February 2014