Water and Effluent Treatment Magazine
Issue link: https://fhpublishing.uberflip.com/i/1029923
T: +44 (0) 1604 601188 | E: customerservice@avkuk.co.uk The AVK Series 260/60 & 61, 258/60 and 258/6X Tensile Resistant Flange Adaptors and Couplings • Available in size range DN350-1200. (Series 260/61 DN350-700, Series 260/61 DN800-1200) • End restraint is obtained by individual grippers independently torqued • Full tensile (end-load) capabilities. • When fitted on polyethylene pipe, heat blankets are not required offering cost savings on installations. • EPDM seals as standard. • Blue fusion bonded epoxy coating to WIS 4-52-01. • Emergency service available. • The range is capable of connecting majority of pipeline materials such as ABS, cast iron, ductile iron, epoxy coated steel, Polyethylene PE80 and PE100 and PVC. Flange adaptor only • PN16 drilling available as standard. • Other drillings available to order. • Cogged flange adaptor version to suit 'special' drillings. Adaptors can be notched. TO COMPLIMENT OUR LARGE DIAMETER VALVE RANGE WE OFFER DISMANTLING JOINTS, UNIVERSAL STRAIGHT COUPLINGS, STEP COUPLINGS, FLANGE ADAPTORS AND TENSILE RESISTANT FLANGE ADAPTORS AND COUPLINGS EXPECT... LASTING INNOVATIONS Series 265/30 Dismantling Joint DN300-1600 Series 260/30 Flange Adaptor DN350-1600 Series 260/60 & 61 Tensile Resistant Flange Adaptor DN350-1200 Series 258/61 Tensile Resistant Coupling DN350-700 Series 258/60 Tensile Resistant Coupling DN800-1200 Series 259/30 Stepped Coupling DN350-1600 Series 258/30 Straight Coupling DN350-1600 Series 265/50 Dismantling Joint DN300-2200 The AVK Series 265/30 and 265/50 Dismantling Joints: • Available in size range DN300-2200 # • Longitudinal adjustment 60mm • PN16 drilling available as standard. • Other drillings available to order. • Blue fusion bonded epoxy coating. • WRAS approved component materials. • Coating complies to WIS 4-52-01. • EPDM seals – BS681-1 as standard. • Nuts and bolts coated to WIS 4-52-03. • Emergency service available. The AVK Series 258, 259 and 260 Couplings and Flange Adaptors: • Available in size range DN350-1600. • Manufactured to specified pipe OD. • Sealing tolerance of +2/-5mm which offers flexibility on installation. • 7mm sealing tolerance means product is quick and easy to install. • WRAS approved component materials. • Blue fusion bonded epoxy coating. • EPDM seals as standard. • Deflection (at each end): - DN350 – 600 4° - DN700 – 800 3° - DN900 – 1600 2° • Coating complies to WIS 4-52-01. • Nuts & bolts coated to WIS 4-52-03. • Emergency service available. Flange adaptor only • PN16 drilling available as standard. • Other drillings available to order. • Cogged flange adaptor version to suit 'special' drillings. Adaptors can be notched. Series 258/61 www.avkuk.co.uk